Posts Tagged ‘Sony vgp bps2c battery’

IRC-resistant Pulse Resistance can be used for power supply & charger

November 19th, 2009

IRC-resistant Pulse Resistance can be used for power supply & charger

IRC for design engineers to provide products for high-performance sony vgp bps9 , VGP-AC19V13 and stable power resistors, their resistance to introduction of chip resistors with a rated voltage pulses of high value, affordable, large-scale values within the surge and so on. The company produced PWC Series resistors is used for power and the choice of circuit protection devices, existing 0805,1206,2010, and 2512 four kinds of specifications. PWC Series resistors are also equally suitable for portable battery chargers, motor control and line-powered equipment.

0805,1206,2010, and 2512 package sizes, the PWC Series resistors feature power ratings of 125mW, 330mW, 750mW and 1.5W; maximum rated voltage of 150V, 200V, 400V and 500V; resistance range of 1.0Ω to 10MΩ, error range of ± 0.5% ~ ± 5%; when the resistance is greater than equal to 10Ω, the absolute TCR (temperature drift coefficient) of ± 100ppm / ℃; when the resistance is less than 10Ω, the absolute TCR of ± 200ppm / ℃; Work temperature range is -55 ℃ ~ +155 ℃. Sony VGP-BPS2A , VGP-BPS9 IRC company also according to customer requirements outside these specifications to products. Above in quantities of 5,000 pieces, PWC 2512 series resistance of 0.39 U.S. dollars per tablet, delivery time is 8 weeks.

Constant rate of power launched ES (D) XXHS (D) XX-XW Series

ES (D) XXHS (D) XX-XW single (double) output (power: 5W Max)

Description: single-row-line (SIP), isolation voltage up to 4500VDC, convert any value out of an arbitrary value of voltage input voltage output accuracy of ± 2% or ± 3%

Jane said: DC / DC set voltage isolation single (positive pressure or negative pressure Sony VGP-BPS8 , Sony vgp bps2c battery) / Dual-output (two-way or two-way positive pressure or negative pressure and a positive one negative) converter, the output common a ground, fast transient response very low ripple noise output without the need for external components, you can work, using 8PIN separate pin, 16PIN dual in-line, small package (can also be multi-Isolated Multiple Output)

Application: Portable instruments, medical instruments, automatic control devices, anti-theft alarm, hand-held meter, PDA, GPS receiver, TFT / LCD and so on with the sony battery VGP-BPS2A.

. Operating temperature: -40 ~ +85 ℃

. Storage temperature: -65 ~ +150 ℃

. Efficiency: 80% Min (full load)

. Isolation Voltage: 4500VDC

. Output ripple / noise (20MHz bandwidth): 100mVp-p Max

. Package: SIP, DIP, the international standard pin definition of VGP-BPS2A , VGP-BPS10

. Packaging comply with UL94-V0 standard

. Power: 0.1W ~ 5W