Posts Tagged ‘laptop battery’

Zen and the Art of Laptop Battery Maintenance

August 2nd, 2009

Zen and the Art of Laptop Battery Maintenance

Keep your notebook or netbook’s power pack in tune

We all own more battery powered products than ever before, and in most cases those laptop batteries are rechargeable. Laptops, music players, phones – they all have rechargeable power packs, almost all of them using lithium.

These batteries don’t last forever. No matter what you do, their capacity to hold charge will decline over time, typically down to 80 per cent after 12-18 months in the case of laptop batteries.

That’s a range, not an absolute cut-off point, so how can we make these batteries last as long as possible? Ignoring the exceedingly rare risk of a fire, is there any way to ensure we get the best performance from our portable power supplies?

Follow some basic rules, and the answer is yes.

The model usage pattern is the mobile phone. Of all the rechargeable laptop batteries we’ve used, the ones in phones have always proved to retain their capacity longer than batteries in laptops, cameras and MP3 players. It takes a long time, generally speaking, for a phone battery to reach the point where no matter how long you charge it, it goes from full to empty in a very short space of time.

Contrast that with the netbook battery sitting next to us, which although less than a year old will discharge from full in under 20 minutes. That’s with the netbook just sitting there, screen on, connected to the internet. It should last eight times that.

The keys to pa3420u-1brs battery longevity are regular usage and making sure cells are recharged before they become empty. Phone batteries typically take a couple of days to run down and tend not to be constantly on and off the charger during that period. Rather than waiting until the phone has so little power it switches off, most handset owners recharge their phones when they get a low-charge warning, usually around ten per cent capacity.

This ensures a steady, even cycle of charge and discharge, and if there’s an operating condition lithium batteries respond well to it’s regularity.

The 6t473 Laptop batteries won’t, of course, give you two days of usage, so it’s not necessarily practical to follow that charge-discharge-recharge pattern exactly, but you can get close. Make sure you regularly use your laptop on battery power. Don’t work on it with it always plugged into the mains.

If you do use the mains as your primary power source – as you might well if the notebook’s your main machine – at least make sure you use your laptop on HP Pavilion DV4000 battery power a couple of times a week. This is what we didn’t do with the netbook. It has stayed attached to its AC adaptor for most of its life, with the battery barely being used.

The connected battery will charge to 100 per cent and then the battery pack’s electronics will ensure the cells receive no further charge. At this point, the biggest threat to the battery is heat from the laptop’s internals. Make sure your laptop’s vents don’t become covered. Beyond the heat generated by its operation, a laptop can safely be left connected to the mains.

There’s no harm in removing the battery from a laptop that’s going to stay connected to the mains for a while. Just make a note of the optimum HP Pavilion DV1000 battery storage conditions – more on this later – and don’t inadvertently yank the power cable. With no battery, there’s no back-up for your laptop’s memory.

Apple machines are an exception, and others may be too: they auto-underclock the processor when the battery’s removed, so despite being connected to the mains, they won’t run at full strength. We think that’s daft, but that’s Apple for you.

When you use your laptop on PB995A battery power, make sure its charge drops to at least 80 per cent. But don’t let it drop to zero. Depending on which operating system you use and how its power settings are configured, you’ll get a low-power warning first and, later, your machine will sleep, hibernate or shut down.

At this point, your battery should still be charged to 5-10 per cent of its capacity, and you should now charge it, whether you want to continue working or not. If you’re not going to be able to do so for some time, make sure you’ve saved your work and your laptop’s shut down or hibernating rather than sleeping. These two modes turn the laptop off whereas sleeping just keeps it ticking over, but power is still being drained and you run the risk of emptying the battery.

Completely draining the battery is a no-no. Battery manufacturers and laptop makers say that it’s a good idea to drain the HP Pavilion ZV5000 battery as far as the laptop will allow every so often and to then charge fully in order to synchronise the various capacity monitors within the power pack and the laptop. That ensures that your capacity read-outs are as accurate as they can be.

There seems to be a consensus that daily-use laptops don’t really need this, and certainly not on even a monthly basis. Occasional-use laptops, on the other hand, may benefit.

Eking out the charge while your using your computer on Pavilion ZV5000 battery power is simply a matter of disabling Bluetooth and Wi-Fi if you don’t need them, making sure your system spins down the hard drive when it’s not required, and – perhaps best of all – dimming the screen’s backlight.

How temperature affects a battery’s capacity decline
Battery capacity after one year

If running to empty or never discharging at all are to be avoided, high temperatures are right out. Batteries’ inevitable capacity decline can be slowed by keeping the inspiron 1150 battery cool

According to website Battery University, a battery kept full will see its capacity drop by six per cent after a year if it’s kept at freezing point. Kept at 60°C, however, the same battery will lose 40 per cent of its capacity to hold charge after just three months.

At 25°C, you’re looking at a 20 per cent capacity loss after one year. Since your working environment is likely to be less than 25°C, the reduction will you see will be a little less than that, and by making sure the Toshiba PA3107U-1BRS battery is used regularly and evenly, you should be able to delay the point at which the battery has only 80 per cent of its starting capacity to 18 months or more.


Cycle logical: check your battery’s recharge count in Mac OS X

Hot-running laptops will have the reverse effect, so if your notebook’s like that, consider buying a cooling stand to help draw heat away from the machine and Compaq Presario V4000 battery. Don’t keep your laptop in a hot car cabin, or in direct sunlight.

If your laptop’s going to remain unused for a long period, keep it cool. Never freeze it, but sticking the battery in the fridge, for example, will prolong its life. Battery manufacturers recommend storing batteries with a charge level of 40-50 per cent.

If you do refrigerate a Pavilion ZD8000 battery, don’t start using it as soon as you take it out again. Leave it several hours to warm up to room temperature first. Rapid warming could cause condensation, and you don’t want moisture forming inside your battery pack or laptop.

If you have a spare battery pack handy, keep it cool and charged to 40-50 per cent of its maximum capacity until you’re ready to take it on your travels. At that point, charge it up and use it as often as you use the other battery, so they both undergo regular charge and discharge cycles.

Charge Cycles Explained

Battery longevity – how long the battery lasts rather than how long it’ll power a device from a full charge – is typically measured in cycles, with one cycle being a discharge from full to empty.

This doesn’t need to happen all at once. A cycle is reached when 100 per cent of a Latitude D800 battery’s potential capacity has been taken, even if it’s charged up in the meantime. If you drain a battery by half one day, charge it back up, take 25 per cent the next day, charge it up again then drain it by a quarter on the third day, that’s one cycle: 50 per cent + 25 per cent + 25 per cent.

That might suggest the best way to eke out cycles isn’t to discharge the battery too much, but don’t forget, lithium-based Dell laptop battery like to be used, not left on 100 per cent all the time.

Laptop makers typically say a machine’s battery capacity will have declined to 80 per cent of its original capacity after 300-odd cycles.

How to replace battery cells inside laptop battery

July 20th, 2009

How to replace battery cells inside laptop battery

In the last article, we have introduced “how to hack dead laptop battery” to our readers, but it is too simple. Now we write a detail article about ” how to replace battery cells inside laptop battery”.

At present, there are many articles about “how to purchase and use laptop battery” on the network , but there are too less article about “how to repaire laptop battery”. For this reason, we decided to write a article about,laptop battery repair industry to help notebook users know what to do when laptop battery broken.

To notebook the battery is very important as the mobile work. The notebook become to desktop without laptop battery. There are battery cells and protection board in laptop battery inside. The batteries cells supply the power and the proctection panels protect the board safety when charging. Battery cells are consumable items, the capacity reduce in each using, which directly determine the quality of notebook batteries.

Notebook battery life short suddenly , cant work, laptop battery down suddenly (such as: battery capactiy suddenly reduce from 40% to 10% when working), laptop battery cant be fully charged,notebook battery cant be fully discharged (the notebook closed when the battery power state in 40% or more), the above cases may be caused by batteries capacity declining or batteries cells damage. Of course, there may be due to damage of the protection board, but this possibility is very small.


laptop battery cells

If you find that above failure happened to your notebook, it is necessary to check your laptop battery in laptop battery maintenance business. Now, let me introduce the whole process of laptop battery cells changing (for example Thinkpad T40 battery) .
First, we use professional equipment to detect the cause of the malfunction. There are many types equipment of Battery Fault Detection, such as: Texas Instruments products, MAX products, Ateml products, and even some personal home-made products. Most we use the commonly Texas Instruments (Texas) EV2300


Use professional equipment and related software to detect the cause of the malfunction


Battery Fault Detection


Texas Instruments EV2300


Once detected 92P1101 battery cells faulty , we are prepare to change the batteries cells for notebook battery.

Before the battery cells changing, We would like to tell you about the structure of the notebook battery.


The 92P1102 laptop battery are made up of three parts: batetry shell, battery cells and protection board.

In general, notebook battery can be divided into three parts: the shell, batteries and protection board。


Battery shell

Battery shell. That is notebook battery casing. There are different three types: type, ultrasonic bonding and adhesive bonding type.


08K8193 Batteries cell

Batteries cells group, that is, combination the batteries cells together in parallel and series connection. In accordance with the parallel, in series of different combinations can be divided into: 2 parallel and 3 serial connection (the most common), 2 parallel and 4 serial, 2 parallel and 2 serial, 3 serial and 3 parallel and 3 parallel and 4 serial (relatively rare).


Protection panel

Protection board, which is based on an agreement SMB1.1 circuit board, with power management functions and charge-discharge management.
Protection board, which is based on an agreement SMB1.1 circuit board. There are three chips on it : battery Measurement management chip, charge and discharge management chip and serial EEPROM memory chips


08K8192 Protection board


On positive plate : measuring management chip and charge-discharge management chip


The plate back has a serial EEPROM memory chips

Decrypt and unlock the protection board are two different works. Before you go into the battery management system you must decrypt the protection board, unlock the battery management system in order to change the parameters of the battery and use of information. If you only change batteries cells without unlock, you can not achieve satisfactory results (for example: the battery can only charge to the state “the last full charge capacity”, the battery maintenance management information will be displayed the charged number)
We use professional equipment and related software to unlock and decrypt the protection board. Of course, you must choose the appropriate equipment by 92P1087 battery management chip design.


use professional equipment and related software to unlock and decrypt the protection board


choose the appropriate equipment by battery management chip design


related software for unlock and decrypt the protection board


Programmer

If the protection board hardware damaged , we would also use oscilloscope, multimeter and logic analyzer


oscilloscope, multimeter


logic analyzer

After the deal with the batteries protection board , let me introduce the method to choose the right cells. We must use sub-meter cabinet and the internal resistance to check batteries capacity resistance, separation voltage, select out all specs of parameters for comparison with similar groups. Also the thinkpad R50 battery thinkpad T41 battery thinkpad T42 battery thinkpad T43 battery is the same battery cells.


Sub-capacity cabinet


Sub-capacity cabinet manage software


Select the similar cells to make a battery group

Then we will use the spot-welding and Nickel sheet to joint the batteries cells together.


spot-welding


use the spot-welding and nickel films to joint the 92P1011 batteries cells together


The Nickel sheet we use are designed in round corner


round corner and straight angle Nickel sheet

After unlock and decrypt the protection board, connect the battery cells group. We can assemble the shell protection board and cells together.


assemble the shell protection board and cells together

During the assemble, you must take high attention. The steps is also suitable for IBM 40Y6795 40Y6797 40Y6799

After doing the above steps, the battery cells changing is compeleted. The repaired battery quality is the new battery in most function, so you must calibrate it first. Generally, you should fully charged in 1o hours then full discharge it 2-3 times.

Trackback: laptop battery blog