BYD to take the lead private enterprises to create the first of a pure electric vehicle, the matter of China’s car industry is no doubt a major miracle. It also triggered a lot of suspense. The feasibility of electric cars from their own point of view, the core issue of debate lies in batteries, electric bicycle very well-known to describe the problem to Thinkpad T30 battery IBM 40Y9797 EVO N410C battery.

A few years ago, appeared in the market for electric bicycles, pedal the liberation of the suffering consumers, it also highlights a number of electric vehicles of its own problems: First, the use of rechargeable batteries for electric vehicles as fuel for a major common problem is lack of motivation, Start slowly and accelerate slowly Apple A1078; Second, rechargeable batteries are usually “short-lived”; Third, the easy circuit failure, often the way “off.” As a result of these widespread problems, the electric bike several times in the market perform “a flash in the pan”, the market is very slow to start. Small electric bicycle laptop battery in resolving the issue even come a long way so difficult, as a “monster” of BYD electric cars will be going through the same test it? This will be the BYD electric vehicle facing the first suspense.

Second, electric cars cost more than conventional gasoline cars, electric cars today is also difficult to mass commercial production of one of the main obstacles. While BYD electric cars that the cost of its single laptop battery only 4 million, but the use of rechargeable batteries matching the cost and determine the vulnerability of the overall consumption of electric vehicles the cost is not a small sum. BYD electric cars will be how to effectively address the rechargeable dell laptop battery life and cost issues? This is the second largest of its suspense face.

Third, although the electric car is environmentally-friendly vehicle, but the Apple laptop battery itself is not environmental protection, the use of complex chemical raw materials created by the battery once the waste, recycling will become difficult to deal with the toxic chemical waste, scrap battery recycling has become the face of environmental protection a major issue. BYD electric cars, even if the realization of the mass production and mass consumption, and if it failed to address the concentration of waste battery recycling issues,

The environmental protection departments may not be easily released. In short, dare to eat a crab BYD car while the first one to create electric vehicles with Thinkpad X40 battery Latitude C600 battery and at the same time can be said to have produced a series of new questions. 1 China’s first electric vehicle will go from here?

1. Dont store the Electric vehicle battery in powerless

It is prohibited that store the laptop battery in a state of loss. State power loss is the failure to charge battery in time after use. Stored in the battery state of loss, it is prone to sulfate and lead sulfate crystals attached to the pole on the board, plug the electric ion channels, resulting in under-charging, the battery capacity decline. Idle state power loss the longer the more serious battery damage. Therefore, the battery should be charged fully once a month when not in use, so that the battery can keep in a good health state.

2. regular inspection in time

In the use of process, if the continued line of electric vehicles in a short period of time a sudden drop in mileage of more than ten kilometers, it is likely that the battery pack at least one battery cell appears broken, soft plate, plate active material shedding phenomenon, such as short-circuit . At this point, the battery should be repaired in time to the professional bodies to check, repair or distribution group. This can be relatively extended life Dell laptop battery to maximize cost savings.

3. avoid large current discharge

Electric cars at the starting line, manned, uphill, please use pedal power to help avoid a momentary high-current discharge. High-current discharge easily lead to lead sulfate crystallization, to the detriment of the physical properties of the laptop battery plate.

4. keeping right charging time

In the use of process, should be based on the actual situation accurately grasp the charging time, frequency and use of reference normal mileage situation and pay attention to the capacity of the battery manufacturers to provide the size of note, as well as matching the performance of the charger, the charge current to grasp the size of charging parameters such as frequency . Generally batteries are recharged at night, with an average charging time in about eight hours. If shallow discharge (charge mileage after a very short period), the battery will soon be full of and continue to charge-off charge will appear, and that leads to cell loss, fever, lower battery life. Therefore, in order to discharge the HP laptop battery depth of -70% to 60% when an electric charge the best, the actual use can be converted into cycling mileage, according to the need to charge the actual situation, to avoid charging damage.

5. prevent exposure

Electric vehicles is prohibited under the sun exposure. Environment temperature is too high will increase the internal pressure of the battery cell pressure limiting valve automatically opens, is a direct consequence of the loss of water to increase the Toshiba laoptop battery, and battery cell over-activity of water is bound to trigger a decline to speed up the plate to soften, charging shell body fever, from drum shell, deformation, such as a fatal injury.

6. avoid charging plug fever

Charger output plug loose contact will lead to the phenomenon of oxidation, such as charging plug fever, fever for too long will lead to short-circuit plug charging, direct damage to the Sony laptop battery charger, lead to unnecessary losses. So when found out that the situation should be promptly or replace the connector to remove oxides.

TrackBack : laptop battery blog